woodworking for mere mortals router table
I’ve been planning to make a router table for quite a while and it took me some time to figure out exactly what i wanted in a router table. i wanted it to be sturdy, and have a reasonably large work surface. i think when i finish the top, it will probably be 34″ wide by about 26″ deep. i also wanted it higher than most tables.. I’ve been working on the top for my router table and once again, am going back and forth on the fence. i was originally going to add some t-slots in the top to adjust and lock down the fence. but then i saw one that employs a clamping system on the edges of the table.. When i set out to make my router table, i decided early on that i wanted to include a router lift. it makes it easy to raise and lower the router without having to reach underneath, and bits can be changed from the top of the table. lots of lifts. i looked at a lot of different lifts..
Dewalt dw745 station built in router | table saw workbench
Folding sawhorses step by step with limited tools
woodworking for mere mortals router table
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.